Manual Transfer Switch GLZ1 3P 4P 100A 160A 200A 250A 315A 400A 630A 1000A 1250A 1600A Manual Changeover Switch for Generator
Application:
GLZ1 Manual Change Over Switch is suitable for the changeover of two sets of low voltage electric circuit or the changeover of 2 sets of on-load devices or safety insulation.
Mode of operation:
– Handle is operated inside the cabinet
– Handle is operated outside the cabinet
Products with observation windows can be provided according to the demand to observe directly the on and off state of contact.
The products have 3 poles, 4 poles, and (3 poles + on and off netural pole).
Extended shaft is used for the operation outside the board.
Two sets of auxiliary contacts can be assembled according to the demand.
Mechanical property and electric property correspond to the mechanical property and electric property of GLZ1. A bridge can provided to connect the inlet or outlet terminal of the switch. Note: The bridge connection is chosen, an explanation is needed to indicate the inlet or outlet is connected with it.
